Bolus matters: impact of food oral breakdown on dynamic texture perception
Devezeaux de Lavergne, M.S.M. - \ 2015
Wageningen University. Promotor(en): Tiny van Boekel, co-promotor(en): Markus Stieger; F. van de Velde. - Wageningen : Wageningen University - ISBN 9789462574496 - 227
textuuranalyse - textuur - voedsel - structuur - eigenschappen - perceptie - spijsvertering - gels - elektromyografie - masticatie - kwalitatieve analyse - worstjes - texture analysis - texture - food - structure - properties - perception - digestion - gels - electromyography - mastication - qualitative analysis - sausages
Background and aims:
Texture is an important, yet complex, quality attribute of food. Food structure and properties can be linked to texture perception during the first bite. However, the perception of attributes during chew down is more difficult to explain, as food requires to be broken down to be swallowed safely. Food oral processing, which is a recent discipline connecting food science to the physiology of the eating process, is considered to be the key for understanding dynamic food texture perception. The aim of this thesis is to understand the link between food properties and texture perception by investigating oral food breakdown, in simple model foods.
Gels were used as a model for soft solid foods. Several properties of the gels were controlled by modifying the composition of gels, including fracture stress and fracture strain, oil droplets binding to the gels matrix, melting, serum release and mechanical contrast. The texture perception of the gels was measured using several sensory methods. Qualitative descriptive analysis (QDA), progressive profiling and temporal dominance of sensations (TDS) were compared in the assessment of dynamic texture perception. In order to link gel properties to texture perception, the oral processing of gels was measured through analyses on the gel bolus and measurements of chewing behaviour. Gel boli were expectorated at various stages of oral processing and were analysed for gel fragments size and number, mechanical properties and saliva incorporation. These analyses were used to quantify the degree of breakdown of gels and to relate bolus properties to changes in texture perception. Chewing behaviour was measured using Electromyography (EMG) to understand the role of oral processing behaviour in bolus formation and dynamic texture perception.
Dynamic texture perception of gels could be measured by QDA, progressive profiling and TDS which were complementary methods. Fracture properties of gels could predict the perception of first bite texture attributes. Fracture stress and fracture strain were correlated to first bite firmness and brittleness respectively. During chew down, the link between gel properties and texture perception became less clear. Nonetheless, fracture properties and other gels properties, such as melting and serum release, related to chew down perception. Bolus properties depended on gel properties, but related better to chew down texture perception than gel properties. Mainly changes in mechanical properties and fragmentation of the bolus could explained the perception of complex texture attributes, such as creaminess and graininess respectively. Chewing behaviour depended on products properties. In addition, chewing behaviour impacted the formation of the bolus and could result in differences in dynamic texture perception between groups of individuals.
The oral breakdown of food is a valuable input to understand the perception of complex chew down texture attributes. Such an input could be used to design foods with a desired texture sensory profile for reformulation of foods fitting in a healthier diet or foods for target consumer groups.
Effecten bodem- en structuurverbeteraars; onderzoek op kleigrond 2010-2014
Balen, D.J.M. van; Topper, C.G. ; Geel, W.C.A. van; Haan, J.J. de; Haas, M.J.G. de; Bussink, D.W. - \ 2015
Lelystad : PPO AGV (Rapport / PPO-AGV 659) - 63
akkerbouw - bodemstructuur - structuur - lichte-matig zware kleigronden - flevoland - poldergronden - bodemvruchtbaarheid - kalkmeststoffen - bodemverbeteraars - arable farming - soil structure - structure - clay loam soils - flevoland - polder soils - soil fertility - liming materials - soil conditioners
In de praktijk lopen telers steeds vaker tegen problemen aan van een slechte bodemkwaliteit. Intensieve bouwplannen, steeds zwaardere mechanisatie, uitloging (Ca-uitspoeling), piekneerslagen en de schaalvergroting in de landbouw leiden tot vermindering van de fysische bodemvruchtbaarheid en de structuur van de bodem. Om de bodemstructuur te verbeteren, worden door industrie en handel zogeheten bodemverbeteraars en kalkmeststoffen aangeboden. Er is een grote variatie in type producten, de wijze waarop ze werken en de mate waarin ze een directe dan wel indirecte invloed op de bodemvruchtbaarheid hebben. Objectieve informatie over het effect van de aanbevolen producten op gewasopbrengsten en fysische, chemische en biologische bodemvruchtbaarheid ontbreekt. Uit eerdere proeven blijkt dat de effecten binnen 1 of 2 groeiseizoenen vaak afwezig zijn. Veel fabrikanten geven aan dat pas op langere termijn effecten te verwachten zijn.
Protein mixtures: interactions and gelation
Ersch, C. - \ 2015
Wageningen University. Promotor(en): Erik van der Linden, co-promotor(en): A.H. Martin; Paul Venema. - Wageningen : Wageningen University - ISBN 9789462574212 - 199
eiwit - wei-eiwit - sojaeiwit - gelering - gelatine - gels - reologie - structuur - moleculaire interacties - protein - whey protein - soya protein - gelation - gelatin - gels - rheology - structure - molecular interactions
Gelation is a ubiquitous process in the preparation of foods. As most foods are multi constituent mixtures, understanding gelation in mixtures is an important goal in food science. Here we presented a systematic investigation on the influence of molecular interactions on the gelation in protein mixtures. Gelatin gels with added globular protein and globular protein gels with added gelatin were analyzed for their gel microstructure and rheological properties. Mixed gels with altered microstructure (compared to single gels) also differed in modulus from single gels. Mixed gels with microstructures similar to single gels were rheologically similar to single gels. Alterations in microstructure were attributed to segregative phase separation between proteins which occurred during gelation. Gelation was treated as a growth process from macromolecule to space spanning network. At conditions where electrostatic interactions were screened the occurrence of phase separation was attributed to the molecular size ratio between gelling and non-gelling proteins before gelation and changes of this size ratio during gelation. Here only mixtures that during gelation passed a region of high compatibility (similar molecular sizes) before entering a region of decreasing solubility phase separated. For applications this implies that whenever the gelling molecule is larger than the non-gelling molecule phase separation during gelation is unlikely while reversely, if the gelling molecules is smaller than the non-gelling molecule phase separation during gelation typically does occur
Water holding of protein gels
Urbonaite, V. - \ 2015
Wageningen University. Promotor(en): Erik van der Linden, co-promotor(en): Laurice Pouvreau; H.H.J. de Jongh. - Wageningen : Wageningen University - ISBN 9789462574229 - 206
sojaeiwit - ovalbumine - wei-eiwit - waterbergend vermogen - gelering - structuur - morfologie - reologie - permeabiliteit - centrifugeren - soya protein - ovalbumin - whey protein - water holding capacity - gelation - structure - morphology - rheology - permeability - centrifugation
Food products are typically multicomponent systems, where often the spatial volume is set by a protein continuous network. The ability of protein-based food products to entrap water and to prevent its exudation upon mechanical deformation is important for the texture and thus sensory perception of food products. Understanding of structural origins that determine gel water holding is therefore essential, and would allow designing foods with controlled sensory perception. Water removal from the gel (quantity, kinetics and mechanism) is related to the coarseness and deformation of the network. An understanding of the interplay between the effect of coarseness and stiffness on WH in fine and coarse gels allows one to take a better control and tune juiciness and the release of tastants from food products.
Onkruiddruk blijft hoog bij niet-kerende grondbewerking
Balen, D.J.M. van - \ 2014
Boerderij 99 (2014)50. - ISSN 0006-5617 - p. 47 - 47.
groenteteelt - koolsoorten - penen - daucus carota - cultuurmethoden zonder grondbewerking - gewasbescherming - onkruidbestrijding - teeltsystemen - opbrengst - houdbaarheid (kwaliteit) - structuur - bodemstructuur - bodemstructuur na grondbewerking - vegetable growing - cabbages - carrots - daucus carota - no-tillage - plant protection - weed control - cropping systems - outturn - keeping quality - structure - soil structure - tilth
Hardere grond maar meer wortels bij proef niet-kerende grondbewerking PPO Lelystad. PPO-onderzoeker Derk van Balen licht e.e.a. toe.
Structuring high-protein foods
Purwanti, N. - \ 2012
Wageningen University. Promotor(en): Remko Boom, co-promotor(en): Atze Jan van der Goot. - S.l. : s.n. - ISBN 9789461731913 - 188
eiwitten - structuur - gelering - reologische eigenschappen - wei-eiwit - proteins - structure - gelation - rheological properties - whey protein
Increased protein consumption gives rise to various health benefits. High-protein intake can lead to muscle development, body weight control and suppression of sarcopenia progression. However, increasing the protein content in food products leads to textural changes over time. These changes result in product hardening over time and several negative sensorial attributes such as rubbery and dry mouth feel.
This thesis describes the role of structuring to control the rheological and mechanical properties of high-protein model foods. By altering the internal structure of the model systems, textural properties of the model systems at initial stage (fresh products) can be improved.
Content of this thesis can be distinguished into four parts. The first part reviews existing studies related to high-protein foods. The effects of ingredients and processing were evaluated with respect to food products having a high protein content. Some studies indicated typical problems occurring in products or model systems with an increased protein content such as product hardening over time. Ingredients that might be added to ameliorate product properties were plasticizers, peptides made from whey proteins, disulphide reducing agents, and components that block the free thiol groups in proteins. This part provides guidelines for structuring high-protein foods aimed at avoiding or reducing the unfavourable changes in properties over time. Concentrated proteins in their native (unmodified) form can be replaced by protein domains or structural elements with altered properties. These domains or elements mitigate the changes in product structure, resulting in a product that is softer than the one made from native proteins only.
The second part focuses on the structural elements made from whey protein isolate (WPI), namely WPI aggregates and WPI microparticles. WPI aggregates were formed by different heating conditions at neutral pH. Generally, a higher concentration and a higher temperature resulted in bigger and less dense aggregates. A higher temperature also resulted in a higher reactivity (a larger number of available thiol groups). Heating an aggregate suspension led to a weaker gel than a gel made from native protein at similar. This result was hypothesized to originate from the lower number of contact points formed with larger aggregates. It was concluded that the most pronounced weakening effect could be obtained with aggregates that are large, dense, and non-reactive. That is why WPI microparticles were created. The particles were formed by gelling a concentrated WPI solution, and subsequent drying the gel and milling it into small particles. Partial replacement of native WPI with WPI microparticles resulted in a weaker gel than a gel made from native WPI only at the same total protein concentration. This result was attributed to the inability of the microparticles to form a gel. However, the weakening effect of these particles in the model system was limited due to water redistribution and the good bonding between the particles and the protein continuous phase.
The third part describes how the properties of high-protein gels containing WPI microparticles change over time. A high-protein gel made from native WPI was used as a reference. The firmness and fracture stress of the gel made from WPI only increased during the first few days and then stabilized. The gel consisting of WPI microparticles in WPI or in a mixture of locust bean gum (LBG)–xanthan gum (XG) tended to harden for a longer period. Most likely, water redistribution is responsible for this observation.
Wagdare, N.A. - \ 2011
Wageningen University. Promotor(en): Cees van Rijn; Remko Boom, co-promotor(en): Ton Marcelis. - [S.l.] : S.n. - ISBN 9789085859239 - 111
emulgering - membranen - inkapseling in microcapsules - structuur - emulsification - membranes - microencapsulation - structure
Encapsulation and use of capsules for controlled release has several applications in pharmaceuticals, foods, cosmetics, detergents and many other products for consumers. It can contribute to sustainability, since it allows an efficient use of active materials, delivery at the required site and possibly a longer shelf life of the products. Many encapsulation systems are basically very thin shells (10 nm – 10 µm) around microscopic reservoirs (100 nm – 100 µm), in which active ingredients are trapped. The release properties are strongly dependent on the material properties of the shell, but also on their size and uniformity.
The overall objective of this research is to understand the formation process of microcapsules and microspheres by using phase separation in well-defined droplets of a polymeric solution. The primary droplets were produced with microsieve emulsification. The polymer used was Eudragit FS 30D (a commercial copolymer of poly(methyl acrylate-co-methyl methacrylate-co-methacrylic acid) 7:3:1), which contains charged carboxylate groups that make the polymer water-soluble at higher pH (>7), allowing for release by a change in pH.
Chapter 2 presents results that give more insight into microsieve emulsification with high porosity micro-engineered membranes. The droplet formation was strongly influenced by the dynamics of surfactant adsorption. The presence of suitable surfactants in both phases prevents the coalescence of droplets and wetting of the microsieve membranes by the dispersed phase during oil droplet formation. This resulted in the formation of stable emulsions of droplets with a narrow size distribution. The flux of the dispersed phase could be increased an order of magnitude compared to previous methods, without loss of size-distribution of the droplets. Thus, use of a high-porosity membrane, in combination with suitable surfactants in both the dispersed and continuous phases resulted in a much more effective and efficient emulsification process.
In Chapter 3 crossflow microsieve emulsification was used to prepare porous microcapsules with an average size of about 30 µm. A mixture of Eudragit and hexadecane in dichloromethane (DCM) was emulsified in water.Being a poor solvent for this polymer, demixing of the droplet into a polymeric shell and a hexadecane-rich core occurred upon extraction of the DCM into the water phase. At a low ratio of polymer to hexadecane, the resulting shells were found to be porous. Increasing this ratio resulted in a reduction of the porosity and pore size of the shell. The Eudragit has a pH-dependent solubility. It is insoluble at acidic conditions and rapidly dissolves at alkaline conditions. The capsules were found to be stable at a pH lower than 7.0, whereas the oil core was released within half an hour at pH 7.1 and within a minute at pH 8.0. The morphology of the microcapsules can be adapted with a careful choice of the concentrations of polymer, hexadecane and solvent. At higher concentrations of polymer, the tiny oil droplets that were captured in the forming Eudragit shell were unable to coalesce completely and small, isolated pores were formed within the shell matrix.
The potential for new microcapsule morphologies was further explored in Chapter 4 where the formation of Eudragit capsules with other oils instead of hexadecane was studied, and in Chapter 5 where a blend of poly(methyl methacrylate) (PMMA) and Eudragit was used.
In Chapter 4 the effects of chain lengths of vegetable oils on the formation of porous microcapsules with hollow and multi-compartment structures is discussed. The encapsulation of oil and the morphology of the resulting microcapsules depends on the interaction between the Eudragit polymer and the type of oil that was used. Microcapsule formation using long chain length oils such as sunflower oil, olive oil and coconut oil resulted in well-defined microcapsules with a single encapsulated oil droplet, covered with a Eudragit-rich shell. On the other hand, capsules prepared with relatively short chain length oils, such as medium chain triglyceride oil, resulted in capsules with many individual small oil droplets encapsulated in an Eudragit matrix. Extraction of the oil from the microcapsules with hexane results in the formation of hollow porous shells as was investigated with optical microscopy and SEM. These structures are formed during microcapsule formation due to the complex phase separation processes in the Eudragit-water-oil-DCM quaternary system.
In Chapter 5 the formation of microcapsules is further explored by using a blend of PMMA and Eudragit. Microspheres formed with this blend were found to consist of a PMMA core inside an Eudragit-rich shell, which tends to be porous. As the amount of Eudragit is increased, a thicker and more porous outer shell is formed due to the enhanced interaction of water with Eudragit. After dissolution of the Eudragit at high pH, different core surface structures resulted, from irregular surfaces to microspheres with a fiber-like, swollen corona around it, and to a surface covered with small nodular structures, dependent on the concentrations of PMMA and Eudragit in the initial mixture. As already indicated above, these structures are formed as a result of complex phase separation processes between polymers and (non)solvents, and between the two polymers.
In Chapter 6 the results described in this thesis were compared with existing literature, yielding an outlook on the field of microencapsulation through phase separation. A general concept is discussed on how to obtain various interesting complex structures with phase separation combined with microsieve emulsification. Finally, a conceptual process design is discussed for industrial scale production of microcapsules and microspheres with use of microsieve emulsification.
This thesis has yielded insight in the formation of a range of microcapsule morphologies by investigating a range of new production methods (microsieves and demixing conditions) and formulations (different concentrations, oils and using one polymer or a blend), and through this provides better insight into the mechanisms of microcapsule formation. While some of the structures may be directly used for microcapsule formation, some other structures may well have potential for other applications.
Figure. Examples of structured microcapsules and microspheres developed in this thesis.
Texture of food gels explained by combining structure and large deformation properties
Berg, L. van den - \ 2008
Wageningen University. Promotor(en): Tiny van Boekel; Erik van der Linden, co-promotor(en): F. van de Velde; Ton van Vliet. - S.l. : S.n. - ISBN 9789085049432 - 193
gels - wei-eiwit - polysacchariden - textuur - structuur - mechanische eigenschappen - reologische eigenschappen - confocale microscopie - gels - whey protein - polysaccharides - texture - structure - mechanical properties - rheological properties - confocal microscopy
Protein fibrillization: preparation, mechanism and application
Akkermans, C. - \ 2008
Wageningen University. Promotor(en): Remko Boom; Erik van der Linden, co-promotor(en): Atze Jan van der Goot; Paul Venema. - [S.l.] : S.n. - ISBN 9789085048794 - 162
bèta-lactoglobuline - wei-eiwit - structuur - ingrediënten - voedingsmiddelen - vezels - fysische toestand - levensmiddelenfysica - beta-lactoglobulin - whey protein - structure - ingredients - foods - fibres - physical state - food physics
The development of new functional ingredients is important for future food products. This PhD research aimed at the development of protein based structuring agents. Structuring agents are ingredrients that can be used to tailor the texture (and the mouth-feel) of products. Proteins were transferred into protein fibres (fibrils) that are long (1 micrometer) and very thin (few nanometers). Due to their special properties, protein fibrils offer unique possibilities to mimick meat structures and make products like yoghurt more creamy. This research shows that protein fibrils can be made from different protein sources (whey protein of milk, soy protein, potato protein) by heating an acidic protein solution. Furthermore, the mechanism of fibril formation was clarified. As a result, it was possible to optimize the fibril production and control the fibril properties. Finally, an important step was made towards the application of these fibrils in food products by studying the behaviour of fibrils in a model system for food products.
Voedselaanbod voor gruttokuikens in de Hollandse veenweidegebieden
Verhulst, J. ; Melman, T.C.P. ; Snoo, G.R. de - \ 2008
Wageningen : Alterra (Alterra-rapport 1668) - 49
limosa limosa - jonge dieren - graslandbeheer - graslanden - structuur - hoogte - hergroei - insecten - voedingsgedrag - voedsel - nederland - weidevogels - veenweiden - noord-holland - limosa limosa - young animals - grassland management - grasslands - structure - height - regrowth - insects - feeding behaviour - food - netherlands - grassland birds - peat grasslands - noord-holland
Dit rapport verkent de voedselbeschikbaarheid van percelen die verschillen in beheer, grashoogte en structuur (uitgedrukt als variatie in grashoogte), voor gruttokuikens. In verschillende typen percelen met lang en kort gras zijn insecten bemonsterd met plakstrips. Het aantal grote insecten (> 4 mm) nam na begin mei sterk af, terwijl gruttokuikens meer afhankelijk worden van grote insecten door het seizoen. Percelen met kort gras (gemaaid of beweid) bevatten minder grote insecten dan ongemaaide percelen en vluchtstroken, maar percelen binnen reservaten verschilden hierin niet van boerenprecelen. Hergroeiende percelen lijken minder geschikt voor gruttokuikens dan ongemaaide percelen Structuurrijke percelen (over het algemeen die met met lang gras) bevatten vooral begin mei veel grote insecten
Structuur en functie van habitattypen : nadere definiëring en monitoring in het kader van de Habitatrichtlijn. Dl. 1: Uitgangspunten
Dobben, H.F. van; Janssen, J.A.M. ; Schmidt, A.M. - \ 2007
Wageningen : Alterra (Alterra-rapport 1529) - 31
monitoring - habitats - structuur - nederland - natura 2000 - abiotiek - habitatfragmentatie - monitoring - habitats - structure - netherlands - natura 2000 - abiotic conditions - habitat fragmentation
De periodieke rapportage in het kader van de Europese Habitatrichtlijn dient naast informatie over de verspreiding en het oppervlak van de habitattypen ook informatie te bevatten over 'structuur & functie' en 'toekomstperspectief' van deze typen. Doel van de voorliggende studie is een nadere invulling te geven aan het begrip 'structuur & functie', zodanig dat duidelijk wordt welke informatie hierover in de rapportage moet worden opgenomen, en hoe de achterliggende gegevens kunnen worden ingewonnen. Aanbevolen wordt om 'structuur & functie' te beoordelen aan de hand van vegetatiestructuur, typische soorten, abiotische condities op de standplaats, en grootte van het habitat. Verder wordt aanbevolen wordt om regionale aspecten zoals depositie, hydrologie en versnippering niet onder structuur & functie mee te wegen, maar onder toekomstperspectief.
Structure-rheology relations in sodium caseinate containing systems
Ruis, H.G.M. - \ 2007
Wageningen University. Promotor(en): Erik van der Linden, co-promotor(en): Paul Venema. - [S.l.] : S.n. - ISBN 9789085046486 - 125
natriumcaseïnaat - reologische eigenschappen - afschuifkracht - gelering - emulsies - structuur - verzuring - spectroscopie - licht - verstrooiing - sodium caseinate - rheological properties - shear - gelation - emulsions - structure - acidification - spectroscopy - light - scattering
The general aim of the work described in this thesis was to investigate structure-rheologyrelations for dairy related products, focusing on model systems containing sodium caseinate. The acid inducedgelationof sodium caseinate, of sodium caseinate stabilized emulsions, and the effect of shear on the structure formation was characterized. Special attention was given to the sol-gel transition point, which was defined by a frequency independent loss tangent. It was shown that the sol-gel transition point is completely controlled by the pH and the temperature, independent of the concentration sodium caseinate or the applied shear rate. Considering sodium caseinate solutions, increase of the temperature of acidification caused a decrease of the critical pH forgelationand a more dense gel structure. The formed gels were not in thermodynamicequilibrium,however, due to the slow kinetics of the system they were stable on the time scale of the experiment. At the gel point we have strong indications that the structure can not be characterized by a single fractal dimension. During the acid inducedgelationof sodium caseinate stabilized emulsions a single sol-gel transition was observed. Addition of an excess of sodium caseinate to the emulsion resulted in two sol-gel transitions upon acidification. Application of shear during the acidification of the emulsions showed a decreasing radius of the aggregates formed at thegelpointwith increasing shear rate. The aggregates formed becamemore densedue to the application of shear while the network that was formed by the aggregates became less compact. No shear induced alignment was observed of emulsion droplets dispersed in water or ina sodiumcaseinatesolution, while emulsion droplets dispersed in axanthansolution did align in a shear field. Addition of sodium inhibited the string formation of the emulsion droplets
Flow-induced structuring of dense protein dispersions
Manski, J.M. - \ 2007
Wageningen University. Promotor(en): Remko Boom, co-promotor(en): Atze Jan van der Goot. - [S.l.] : S.n. - ISBN 9789085046103 - 222
voedsel - structuur - textuur - eiwitproducten - caseïnaten - reologische eigenschappen - nieuwe voedingsmiddelen - voedselverwerking - apparatuur voor de voedselverwerking - kunstvlees - food - structure - texture - protein products - caseinates - rheological properties - novel foods - food processing - food processing equipment - meat analogues
Both health and sustainability are drivers for the increased interest in the creation of novel foods comprising a high protein content. The key challenge is the formation of an attractive, stable and palatable food texture, which is mainly determined by the food structure. In this research, new processing routes based on flow are explored to create innovative protein-rich structures (exceeding 10%), and in parallel, insight is gained in the relevant mechanisms of structure formation. Dense dispersions of sodium caseinate and calcium caseinate, which are derived from milk, were mixed in a conventional mixer and sheared in an in house developed shear cell device. After mixing dense (sodium or calcium) caseinate dispersions, homogenous structures were obtained of which the properties were determined by the dispersed phase added, in this case palm fat. Shearing of dense calcium caseinate dispersions in combination with solidification using the enzyme transglutaminase resulted in completely different structures; highly fibrous structures were produced, which may serve as a basis for the creation of meat analogs. In contrast, after treating dense sodium caseinate dispersions using this novel structuring process, homogenous structures were obtained. It appeared that the intrinsic properties of protein dispersions are important for the formation of fibrous structures using well-defined flow. Based on the differences in performance between the two types of caseinates, tools and parameters can be derived to optimize and control the formation of fibrous products. In conclusion, the development of equipment that is dedicated to structure food ingredients is promising for the creation of novel foods on the one hand, and for gaining scientific understanding of structure formation on the other hand.
Bacillus cereus spore formation, structure and germination
Vries, Y.P. de - \ 2006
Wageningen University. Promotor(en): Tjakko Abee; Willem de Vos; Marcel Zwietering. - [S.l. ] : S.n. - ISBN 9789085043690 - 127
bacillus cereus - bacteriële sporen - sporenkieming - sporulatie - structuur - bacillus cereus - bacterial spores - spore germination - sporulation - structure
Bacterial spores are
Development of dough under shear flow
Peighambardoust, S.H. - \ 2006
Wageningen University. Promotor(en): Remko Boom; Rob Hamer, co-promotor(en): Atze Jan van der Goot. - Wageningen : - ISBN 9789085043577 - 187
deeg - vermenging - kneden - afschuifkracht - gluteninen - tarwegluten - structuur - doughs - mixing - kneading - shear - glutenins - wheat gluten - structure
The overall objective of this thesis is to generate understanding of the relation between relevant process parameters in dough mixing and changes in product properties.
Microstructure, rheology and demixing in emulsions flocculated by polysaccharides
Blijdenstein, T.B.J. - \ 2004
Wageningen University. Promotor(en): Erik van der Linden, co-promotor(en): G.A. van Aken; Ton van Vliet. - Wageningen : S.n. - ISBN 9789058089588 - 121
emulsies - uitvlokking - polysacchariden - reologie - structuur - emulsions - flocculation - polysaccharides - rheology - structure
keywords: Emulsion, b-lactoglobulin, polysaccharides, salt, sucrose, depletion, bridging, percolation, microstructure, micro-rheology, rheology, demixing, creaming, network compression. Abstract In this thesis, a study is presented on gravity-induced demixing behaviour of oil-in-water emulsions, stabilised by b-lactoglobulin and flocculated by various polysaccharides. Flocculation by polysaccharides mainly results in formation of emulsion droplet networks and can proceed via depletion and via bridging. Structural and rheological properties of these different networks were investigated and compared on a micro-and macroscopic level. These properties were related to the demixing behaviour of the emulsions. For emulsion droplet networks, gravity-induced compression of the network leads to separation of a serum layer. For depletion-induced networks, the initial rate of demixing by network compression is usually low and at high polysaccharide concentrations, usually a delay-time is observed before substantial demixing occurs. This delay-time scales with the permeability of the network, the viscosity and the density difference between oil and water. Once demixing has started, the network quickly collapses until the emulsion droplets are packed rather closely together. In bridging-flocculated emulsions, the initial demixing rate is higher, but more water was retained at longer times. The effects of protein, sugar and salts on demixing of depletion-flocculated networks were investigated as well. Protein affected the rate of flocculation and counteracted network formation. Sucrose affected the demixing rate via the viscosity and density of the aqueous phase, but it did not affect the droplet-droplet interactions. Salt affected the electrostatic droplet-droplet interactions. As a result, depletion-flocculation by dextran was inhibited at low salt concentrations. Addition of Ca2+ ions led to a decrease in repulsion between the protein layers, resulting in stronger droplet-droplet bonds, reinforcing a droplet network and retarding network compression.
Structuur als basis voor gezonde koe. Minimale herkauwactiviteit voor 60 slagen per voerbolus noodzakelijk voor goede absorptie voedingsstoffen
Hollander, C.J. ; Duinkerken, G. van - \ 2003
Veeteelt 20 (2003)2. - ISSN 0168-7565 - p. 46 - 47.
melkveehouderij - melkvee - rundveevoeding - voeropname - herkauwen - structuur - dairy farming - dairy cattle - cattle feeding - structure - feed intake - rumination
In deel 4 van de serie Voeranalyse wordt de betekenis van de structuurwaarde van een voedermiddel aangegeven
Bosdynamiek in bosreservaat Zeesserveld
Clerkx, A.P.P.M. ; Goede, D.M. de; Sanders, M.E. - \ 2003
Wageningen : Alterra (Alterra-rapport 668) - 46
bossen - bosinventarisaties - vegetatie - structuur - beschermde bossen - bosecologie - nederland - overijssel - forests - forest inventories - vegetation - structure - reserved forests - forest ecology - netherlands - overijssel
Bosreservaat Zeesserveld bij Ommen is in 2000 voor de tweede keer sinds aanwijzing geïnventariseerd. De boomlaag van grove den is niet veranderd. In de struiklaag heeft op de opgestoven gronden een sterke toename van sporkehout en Amerikaans krentenboompje plaatsgevonden. Hier begint ook blauwe bosbes in de bochtige-smelemat uit te breiden. Op de uitgestoven laagten verloopt deze ontwikkeling veel trager. Amerikaanse vogelkers breidde zich in beperkte mate uit. Zomereik en berk hebben moeite zich te vestigen en handhaven. De ontwikkeling naar een berken-eikenbos zal daarom een proces van lange adem zijn.
Bosreservaat De Imboschberg : Bosstructuur en vegetatie bij aanwijzing tot bosreservaat
Clerkx, A.P.P.M. ; Dort, K.W. van; Zuyderduyn, J.C. - \ 2002
Wageningen : Alterra (Alterra-rapport 616) - 50
bossen - beschermde bossen - structuur - vegetatie - nederland - gelderland - forests - reserved forests - structure - vegetation - netherlands - gelderland
Bosreservaat De Imboschberg is in 1999 aangewezen. Het bestaat voor 50% uit heide. Het bos bestaat voornamelijk uit grove-dennenbos. Ruwe berk is algemeen als mengsoort, soms als hoofdboomsoort na spontane verstiging in stormvlakte uit 1972/1973. Er komen enkele stukken voormalig eikenhakhout voor. In de kruidlaag domineert blauwe bosbes. Beukenverjonging wijst op een ontwikkeling naar een wintereiken-beukenbos op termijn.
A review of model designs
Verdonschot, P.F.M. ; Nijboer, R.C. - \ 2002
Wageningen : Alterra (Alterra-rapport 517) - 91
aquatische gemeenschappen - ecologie - structuur - modellen - neurale netwerken - voorspelling - aquatische ecosystemen - aquatic communities - ecology - structure - models - neural networks - prediction - aquatic ecosystems
The PAEQANN project aims to review current ecological theories which can help identify suited models that predict community structure in aquatic ecosystems, to select and discuss appropriate models, depending on the type of target community (i.e. empirical vs. simulation models) and to examine how results add to ecological water management objectives. To reach these goals a number of classical statistical models, artificial neural networks and dynamic models are presented. An even higher number of techniques within these groups will tested lateron in the project. This report introduces all of them. The techniques are shortly introduced, their algorithms explained, and the advantages and disadvantages discussed.