Measuring thermal conductivity of soils under laboratory conditions.

Authors

  • A.I. Golovanov

DOI:

https://doi.org/10.18174/njas.v17i1.17395

Abstract

Experiments were made to determine the influence of size of soil sample, convection and water flow on the determination of thermal conductivity of soils using a thin needle (0.05 cm radius, 8.5 cm in length) as the heating element and copper cylinders for sample containers. For measurements during a period of 100 seconds the diameter of the sample must be at least 4 cm and to avoid any influence of convection measurements should not exceed 100 seconds. When heating elements are placed horizontally to measure simultaneously the thermal conductivity of different soil layers they should be placed at least 10 cm apart. Thermal conductivity measurements could be used to determine flow velocities of water in coarse sand samples provided that the real flow velocity was highev than 0.35 cm/ min. (Abstract retrieved from CAB Abstracts by CABI’s permission)

Downloads

Published

1969-02-01

Issue

Vol. 17 No. 1 (1969)

Section

Papers

License

© Copyright KLV All rights reserved. The copyright covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature. The Author may publish his/her contribution on his/her personal Web page provided that he/she creates a link to http://library.wur.nl/ojs/index.php/njas and that together with this electronic version it is clearly pointed out, by prominently adding "© KLV", that the copyright for this contribution is held by KLV. The full-text version may be available from the Author's Web page only after a delay of 12 months following the publication of the paper, whereas such a delay is not required for the abstract.